Main Navigation
|
Main ContentImplementation of the FHWA Final Rule on Temporary Traffic Control Devices (23 CFR 630 Subpart K)Jerry Ullman On December 5, 2007, the Federal Highway Administration (FHWA) issued its final rule on new, supplemental regulations concerning the use and payment of uniformed law enforcement officers, positive protection measures between workers and motorized traffic, and temporary traffic control devices on construction, maintenance, and utility work zones. The regulations are intended to reduce the likelihood of fatalities and injuries to both road users and highway workers. The regulations apply to all Federal-Aid highway projects, but state agencies are encouraged to adopt these on other types of projects as well. The regulations become effective in a year (December 4, 2008). View the complete rule. These regulations require all state highway agencies to have a policy in place which requires the systematic consideration and management of road user and worker safety impacts on all Federal-Aid highway projects. Agencies are to establish processes, procedures, and/or guidance to systematically consider the use of the following:
The regulations require agencies to base their procedures and guidance regarding the use of longitudinal barriers and other positive protection devices on an engineering study. Agencies have the flexibility of conducting these studies for individual projects, and/or for establishing their overall guidelines regarding positive protection usage. At a minimum, conditions that place workers at increased risk from motorized traffic (e.g., tunnels and bridges that limit worker escape routes, long duration projects on high-speed facilities that place workers in close proximity to motorized traffic, etc.) and where positive protections devices can significantly improve safety (such as to protect a pavement drop-off that will be in place overnight) shall be considered for positive protection devices. The regulations identify a number of exposure control measures (full road closures, ramp closures, median crossovers, night work, etc.) and additional traffic control measures to improve safety (changeable message signs, intrusion alarms, speed management techniques, etc.) that agencies should consider in some fashion in their processes and procedures. Considerable flexibility is provided to the agencies about how this consideration should occur, the roadway and work zone factors that should be contemplated, and so on. The regulations require agencies to establish policy on the use of uniformed law enforcement officers, again taking roadway and work zone factors into consideration. Night work, temporary lane closures that put highway workers in lanes next to high-speed motorized traffic, and other higher-risk work zones where improved driver awareness and behavior could significantly reduce the risks are among those situations where consideration of law enforcement use is recommended. Also, the regulations require agencies to establish processes, procedures, and guidelines on how to safely get work vehicles and equipment into and out of the work zone for construction deliveries. The processes, procedures, and guidelines should be based on individual project characteristics and factors. A significant amount of the new regulations are devoted to authorizing the use of Federal-Aid funds in paying for these additional efforts, and specifying how such payments should be made. The regulations emphasize the use of unit price bid items rather than lump sum payment for those devices and measures that can significantly improve safety but which affect construction costs. The regulations provide additional flexibility in how Federal-Aid funds are used by agencies in paying for uniformed law enforcement officers when needed.
|